Color steel coil in the use of the process need to pay attention to what matters

Color steel coil is a kind of coil coating widely used in construction, furniture, automobile and other fields, which is favored for its good decorative and weather resistance. From solemn government office buildings, schools, hospitals and other public facilities to modern buildings full of design, from home decoration to automobile manufacturing, color steel coil plays a role with its unique charm. However, in order to give full play to the advantages of color steel coil and improve its service life, the precautions in the process of using is an important link that has to be considered. This article will discuss the color steel coil in the use of the process need to pay attention to matters.

1. when loading and unloading the spreader and the product should be added between the rubber mat to prevent the occurrence of bruising and paint, under the condition should use special spreader. 2. in the longitudinal shear, with the product of the color steel coil, the product of the color steel coil should be used.

2. when cutting longitudinally, the equipment surface contacting with the color coated plate should be paved with rubber mat, and the metal chips when cutting should be cleared in time so as not to scratch the coating on the surface of the color coated plate.

3. When installing the color steel coil, the cut part shall be handled carefully to be placed in the hidden part, and the project with strict requirements shall protect the cut.

4. at the end of project installation, the welding spot and metal chips left on the color plate due to construction should be removed in time so as not to cause corrosion to the color steel coil.

5. The products should be stored in dry and ventilated indoor environment, avoiding open-air storage and storage in places prone to condensation and large temperature difference.

6. It is necessary to cover the film when pressing and forming, such as: PVDF coated color coated sheet, aluminum zinc coated light sheet.

7. The products should be stored in a clean and tidy environment to avoid the erosion of various corrosive media.

8. The ground of the storage site should be flat, free of hard objects and have sufficient load-bearing capacity.

9. Horizontal steel coils should be placed on rubber mats, cushions, brackets and other devices, and the strap locks should be facing upward, not directly on the ground or on the means of transportation.

10. Steel coils are not normally stored in stacks in order to avoid crush injuries. The number of stacking layers should be strictly limited when the steel plates are stacked and stored, and the packages with large weight and size should be placed underneath.

11. When the color steel coil is used on the surface of a building, the products of the same manufacturer and the same production line at the same time should be output as far as possible, so as to avoid mixing and producing color difference.